THIS IS A REMANUFACTURED GENUINE TURBOCHARGER – rebuilt using genuine and/or quality replacement parts
SUIT CYLINDERS – 1 to 3
Note: Unit is supplied less turbine housing (this will fit directly into your existing housing – identical genuine part number – but it MUST be immaculately cleaned and free of any debris to avoid oil contamination or possible blockage to the oil galleries)
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment. All component parts are inspected to exacting standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly ensures proper operation and extends unit life.
• It is up to you to ensure that you have ordered the correct turbocharger part for your vehicle, if you are unsure please contact us to check BEFORE purchasing.
• If you are replacing a turbocharger that has previously failed YOU MUST have had the fault diagnosed and rectified prior to fitment of the new unit.
• Always REPLACE air, oil and fuel filters with new ones and use new engine oil.
• Oil supply lines MUST also be REPLACED to avoid possible contamination and for warranty purposes.